Home  >  News

The Correct Use Of The Fryer

Jul. 25, 2018 | 16:09:11

Proper use of the All Stainless Steel Electric Deep Frying Machine can extend its life, so it is inseparable from the maintenance of the fryer, so what are the correct use of the fryer? China Deep Fryers Manufacturer summarized the following points:

1. It is necessary to add oil to the furnace before use to avoid burning the electric heating pipe;

2, the surface of the heating tube will be generated for a period of time, should be cleaned up in time, at least four times a month;

3. Clean up the residue on the surface of the fryer in time. The residue should not accumulate too much or be too thick to prevent the heat stored in the slag from causing fire.

4, summer electric heating automatic frying machine to change water once a day, in winter can be replaced according to water quality to protect the quality of oil; heating pipe must be immersed in the medium to work.

5. Strictly follow the wiring diagram of the fryer circuit. The outer casing must be grounded. The front section of the main power cable must be connected to the circuit breaker. It is strictly forbidden to contact the electrical components.

6. Before the power is turned on, it is necessary to add water and oil to the fryer to avoid burning the heating tube.

7. Do not add water to the fryer during work. Do not replace the internal water when the oil temperature is higher than 80 °C.

8. Check the performance and sensitivity of the photoelectric switch regularly.

 All Stainless Steel Electric Deep Frying Machine


CONTACT US